A point at which a curve changes from increasing to decreasing, or vice versa.
Key ideas
A function assigns exactly one output to each input in its domain. f(x) means the output for input x.
The domain contains allowed inputs; the codomain is the stated set of possible outputs, and the range contains outputs actually reached.
Make a table of values, label axes and choose consistent scales before plotting.
A root is an x-value where the graph crosses or touches the x-axis. The y-intercept occurs when x is zero.
An intersection solves f(x)=g(x). A maximum or minimum describes an extreme output within the given domain.
For contextual graphs, interpret coordinates with units. A model may only make sense for non-negative or whole-number inputs.
The quadratic has roots −1 and 3 and a minimum at (1, −4).
03 · Follow the working
Worked examples
Read the question first. Cover the working and decide what you would do next.
New step-by-step examples
Find f(−2) and solve f(x) = 13 when f(x) = 3x + 1
f(−2) = 3(−2) + 1 = −5
For f(−2), the input is given. Substitute −2.
3x + 1 = 13
For f(x) = 13, the output is given. Find the input.
3x = 12
Subtract 1 from both sides.
Final answerf(−2) = −5; x = 4 gives f(x) = 13.
01Evaluating a function
The function f is given by f(x)=3x+4. What is f(3)?
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
Purple follows the input 3 into the rule, then the multiplication result 9. The coefficient 3 stays in place.
f(x)=3x+4
Why?The rule says multiply the input by 3, then add 4.
f(3)=3(3)+4
Why?Replace x by the input 3. The 3 outside the brackets is the coefficient.
f(3)=9+4
Why?Multiply before adding.
f(3)=13
Why?Thirteen is the output when the input is 3.
Think about it: Before moving on: what does f(3) mean, and how is it different from 3×f?
02Finding the input for a given output
The function f is given by f(x)=8x+7. For what value of x is f(x)=87?
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
8x+7=87
Why?Write the equation
8x=87−7=80
Why?Take the constant away from both sides
x=80÷8=10
Why?Divide every term on both sides by the coefficient so that the coefficient of the variable becomes 1.
Think about it: Before moving on: how can you check your answer for x by evaluating the function?
03Reading the y-intercept from a graph
Graph 1: The straight line in the graph crosses the y-axis. What is the y-value where it crosses?
Straight line rising from left to right on axes marked from −6 to 6 on each side. The line is drawn across the whole grid.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
The line crosses the y-axis at y=6
Why?The y-intercept is where the line crosses the y-axis, at x=0
Think about it: Before moving on: which point on the graph gives the y-intercept, and why is it the only one you need?
04Reading where two graphs cross
Graph 1: The two straight lines in the graph cross at one point. What is the x-value of the point where they cross?
Two straight lines drawn on axes marked from −6 to 6 on each side. The lines cross at one point.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
The lines cross at x=1
Why?The lines cross where their y-values are equal. Read the x-value of that point from the horizontal axis
Think about it: Before moving on: why is the x-value where the lines cross the solution, and not the y-value?
05Greatest height and time on a graph
Graph 1: What is the greatest height shown on the graph?
Graph of height against time from 0 to 8. The line rises to a high point and then falls.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
It is at (4,9)
Why?Find the highest point on the graph (the turning point)
The greatest height is 9
Why?Read the height from the vertical axis
Think about it: Before moving on: why do we read the height from the vertical axis, and not the time, when asked for the greatest height?
06Least height and time on a graph
Graph 1: What is the least height shown on the graph?
Graph of height against time from 0 to 8. The line falls to a low point and then rises.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
It is at (4,3)
Why?Find the lowest point on the graph (the turning point)
The least height is 3
Why?Read the height from the vertical axis
Think about it: Before moving on: how can you tell the lowest point from the start and finish of the graph?
07Approximate equation crossings
The graph shows f(x)=(1)(x−(−1))2+(0)x+(1) and g(x)=(0)(x−(−1))2+(0)x+(7). Use the graph to solve f(x)=g(x), giving both x-values to one decimal place.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
Crossings: x ≈ −3.4,1.4.
Why?Locate both crossings and read the x-axis
x ≈ −3.4 or x ≈ 1.4
Why?State both approximate solutions
Think about it: Why must you check all crossings rather than stopping after the first?
08Approximate equation crossings — another example
The graph shows f(x)=(−1)(x−(−2))2+(−1)x+(−2) and g(x)=(0)(x−(−2))2+(−1)x+(−7). Use the graph to solve f(x)=g(x), giving both x-values to one decimal place.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
Crossings: x ≈ −4.2,0.2.
Why?Locate both crossings and read the x-axis
x ≈ −4.2 or x ≈ 0.2
Why?State both approximate solutions
09Graphical comparisons of lines and curves
The graph shows f(x)=(1)(x−(2))2+(0)x+(0) and g(x)=(0)(x−(2))2+(0)x+(3). Use the graph to solve f(x)<g(x) for all real x. Report boundary x-values to one decimal place; the formulas continue beyond the window.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
Crossings: x ≈ 0.3,3.7.
Why?Locate the two crossings
The requested relation holds between the crossings.
Why?Compare curve heights between and outside the crossings
Between x ≈ 0.3 and x ≈ 3.7; endpoints excluded.
Why?Treat boundary equality according to the inequality sign
Think about it: Why must you check all crossings rather than stopping after the first?
10Graphical comparisons of lines and curves — another example
The graph shows f(x)=(−1)(x−(−1))2+(−1)x+(−2) and g(x)=(0)(x−(−1))2+(−1)x+(−9). Use the graph to solve f(x)<g(x) for all real x. Report boundary x-values to one decimal place; the formulas continue beyond the window.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
Why this method? Decide whether the input or the output is known. For graphs, label the axes and read the relevant coordinate in the right order.
Crossings: x ≈ −3.6,1.6.
Why?Locate the two crossings
The requested relation holds outside the crossings.
Why?Compare curve heights between and outside the crossings
Outside x ≈ −3.6 and x ≈ 1.6; endpoints excluded.
Why?Treat boundary equality according to the inequality sign
Common mistake
Swapping input and output coordinates. The point (2,5) means input 2 gives output 5. It does not mean that input 5 gives output 2.
Exam technique
Read the scale before estimating a crossing and label a graphical estimate as approximate.
Show your method, use units where appropriate and check whether the question asks for an exact or rounded answer.
04 · Try it yourself
Self-check questions
Work on paper first, then open the answer. These are practice questions, not submitted homework.
Question 1
The function f is given by f(x)=6x+11. What is f(7)?
Show answer & check
53
Compare your result with the answer. If it differs, revisit a worked example and check each step.
Question 2
The function f is given by f(x)=5x+3. For what value of x is f(x)=38?
Show answer & check
7
Compare your result with the answer. If it differs, revisit a worked example and check each step.
Question 3
The graph shows y=2x+7. Read the y-intercept.
Graph of y = 2x + 7 with numbered x and y axes. The y-axis extends above 7.Show answer & check
7
Compare your result with the answer. If it differs, revisit a worked example and check each step.
Question 4
Use the graph of f(x)=x+1 and g(x)=−x+7. What is the x-coordinate where the lines meet?
Two labelled lines f(x) = x + 1 and g(x) = −x + 7 on numbered axes.
2
3
−2
4
Show answer & check
3
Correct: the lines cross at (3,4), so the x-value is 3.
Question 5
What is the greatest height shown on the graph?
Graph of height against time from 0 to 8. The line rises to a high point and then falls.
4
2
6
3
Show answer & check
6
Correct: the highest point is at (3,6), so the greatest height is 6.
Question 6
At what time is the least height reached?
Graph of height against time from 0 to 8. The line falls to a low point and then rises.
1
5
4
7
Show answer & check
4
Correct: the lowest point is at (4,1), so the least height is reached at time 4.
Question 7
The graph shows f(x)=(−1)(x−(1))2+(−0.5)x+(−2) and g(x)=(0)(x−(1))2+(−0.5)x+(−5). Use the graph to solve f(x)=g(x), giving both x-values to one decimal place.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
x ≈ −0.7 or x ≈ 2.7
x ≈ −4.6 or x ≈ −6.4
x ≈ −0.7
x ≈ −1.7 or x ≈ 1.7
Show answer & check
x ≈ −0.7 or x ≈ 2.7
Correct.
Question 8
The graph shows f(x)=(−1)(x−(−1))2+(−1)x+(2) and g(x)=(0)(x−(−1))2+(−1)x+(−5). Use the graph to solve f(x)<g(x) for all real x. Report boundary x-values to one decimal place; the formulas continue beyond the window.
Graph of the two formulas in the question, x from -6 to 6 in tenths; y from -20 to 24. f is solid blue; g is dashed green.
Outside x ≈ −2.6 and x ≈ 2.6; endpoints excluded.
Between x ≈ −3.6 and x ≈ 1.6; endpoints excluded.
Outside x ≈ −3.6 and x ≈ 1.6; endpoints excluded.
Outside x ≈ −3.6 and x ≈ 1.6; endpoints included.
Show answer & check
Outside x ≈ −3.6 and x ≈ 1.6; endpoints excluded.
Correct.
Watch an explanation
Videos for this chapter
Choose one explanation, pause to work an example, then return to the notes. All Maths videos →
Corbettmaths · Start here
Function Machines
The YouTube player loads only when you choose this button.